All 1 entries tagged Dates

Fun with flexlm log files

All three scripts referred to in this post can be found in Fun scripts for processing flexlm log files and have been tested on Linux, Mac OS X and Solaris.

Edit @ 21/11/2014. If your flexlm file comes from a Windows machine, run it through dos2unix first, otherwise the output will have newlines in places you don't want them.

Edit @ 06/11/2016. Fixed processor count being wrong the the processor model name includes the word "processor". Thanks to Chris Tothill for pointing that out.

I've recently found myself looking at the flexlm log for a Matlab license server a lot. I've been mainly wanting to know two things, when did a given person check out a license and who has checked out licenses between two dates. The format of the flexlm license file makes it quite annoying to answer those questions because the lines for people checking out licenses in and out don't contain date info. All you get is something like this

11:55:52 (MLM) OUT: "MATLAB" ringo@blerg

There are occasional lines in the log that give you the date

18:00:54 (MLM) TIMESTAMP 3/14/2013

So if you want to know the date of a particular entry, you can backtrack from it until you find a TIMESTAMP line. It's cumbersome and annoying and gets more so the busier the license server is. I was dealing with a log file that had grown to over 3million lines covering about 17 months. Sometimes the preceding TIMESTAMP is over 500 lines away. Also the date in the TIMESTAMP lines is in the US format month/date/year, which my brain finds hard to deal with. It's a stupid way to write the date. It's not big endian, it's not little endian, it's just a mess that causes endless grief for people not in the US.

Unable to Google up any such pre-existing thing, I ended up writing a script flexlm_add_dates_to_log to parse the log file and prepend dates to all the lines. (As Google bait I'll also say that it adds the date and that you want to add the date.) The result looks like:

2013-03-18 01:06:12 (MLM) TIMESTAMP 3/18/2013
2013-03-18 01:06:15 (MLM) OUT: "MATLAB" george@blah1
2013-03-18 01:06:15 (MLM) IN: "MAP_Toolbox" ringo@blah2
2013-03-18 01:06:16 (MLM) IN: "MATLAB" john@blah3
2013-03-18 01:06:16 (MLM) OUT: "MAP_Toolbox" paul@blah4

Output is written to stdout, you'll probably want to dump it to a file in a suitable location for later analysis.

Figuring out which date to prepend turned out to be a trickier than it first appeared. At first glance you just go through the file one line at a time and every time you find a TIMESTAMP you write that date to the start of the following lines. But TIMESTAMP lines are written at an intervals of six hours. So you end up with sections of the log that look like this

22:26:18 (lmgrd) TIMESTAMP 5/22/2013
23:19:37 (MLM) OUT: "MATLAB" ringo@blah1
23:21:07 (MLM) OUT: "MAP_Toolbox" john@blah2
23:45:24 (MLM) IN: "MATLAB" paul@blah3
23:45:24 (MLM) IN: "MAP_Toolbox" george@blah4
0:19:37 (MLM) OUT: "MATLAB" ringo@blah1
0:21:07 (MLM) OUT: "MAP_Toolbox" john@blah2
0:45:24 (MLM) IN: "MATLAB" paul@blah3
0:45:24 (MLM) IN: "MAP_Toolbox" george@blah4
4:26:18 (lmgrd) TIMESTAMP 5/23/2013

Well not exactly like that, for one thing MLM also writes TIMESTAMP lines and secondly I've copy/pasted some lines and changed the hour, but it illustrates the problem. The first TIMESTAMP in that example is on the 22nd. So in the above example the 22nd would be prepended to all the IN and OUT lines. But look at the time of the last four IN and OUT lines, they actually happened on the 23rd. The way I dealt with that was to also track the hour. When a TIMESTAMP is found the hour is noted and stored as $hour_last_verified. When an IN or OUT line is encountered, the hour is extracted and if it's less than $hour_last_verified, e.g. $hour_last_verified is 23 and the hour just found is 0, then the date prepended is incremented by a day. (It's actually helpful that the time format used is a half arsed 24 hour clock, half arsed because the hour value isn't padded with a leading zero yet the minutes and seconds are. So you don't have mess around converting 02 in to 2 to do an integer comparison. My script pads the hour value in the ouput for neatness.)

Incrementing the date by a day turned out to be surprisingly problematic too. The script is written in bash, so the obvious way to do something like figure out what the day after a certain date is is to call the date command. This is very easy with GNU date, but sadly Mac OS X and Solaris don't ship with GNU userland and whatever date command they ship with lacks the functionality you'd use with GNU date. I decided I wanted to make life difficult for myself by having the script work on Linux, Mac OS X and Solaris. I then spent far longer than was sensible trying to figure out a single way of doing the date calculation that would work on Linux, Mac OS X and Solaris without resorting to python or perl. I've concluded it's impossible. So the script looks to see if it can find what appears to be GNU date installed somewhere, then the date calculation is done by trying to do it the GNU way then if that fails, doing it another way. (If you want to get GNU userland on Mac OS X, install MacPorts and then install the coreutils package.)

It turned out flexlm_add_dates_to_log can take a while to run if you have a very large file, like the 3million line long one I had. (In my tests anything from 45 minutes upwards.) So I wrote a wrapper script for it flexlm_add_dates_to_log_multi_thread_wrapper which splits the log file in to N chunks, where N is the number of CPU cores, processes them simultaneously then outputs the result to stdout. In my tests it's up to 80% quicker. As with flexlm_add_dates_to_log, this was also more problematic than I initially expected, but I won't bore you with how.

The question of who has checked out license between two dates is actually possible to answer from the raw flexlm log. I figured out how to do it with sed and a regular expression that matched TIMESTAMP lines, but then I negected to save a copy of the regex anywhere and also it required the date to be provided in the US date format. The script I wrote to do it using the output of flexlm_add_dates_to_log is flexlm_checkout_between_dates. It takes input from a file so you'll have to write the output of flexlm_add_dates_to_log to a file first. I didn't bother making flexlm_checkout_between_dates read from stdin because it would be very inefficient to keep running flexlm_add_dates_to_log then piping the output in to flexlm_checkout_between_dates.

Mike Willis : 25 Aug 2014 17:11 |  Tags: Date Dates Flexlm Log Maple Matlab |  Comments (0) |  Close comments |  Report a problem