All entries for Saturday 09 May 2009
May 09, 2009
This post is for anyone having problems getting the O2-provided Huawei E169 USB modem to work under Linux. I’ll assumed you’ve searched elsewhere and have an idea of what is going on.
In my case, I had a Gentoo GNU/Linux desktop without internet access although I did have a Windows XP laptop to help me. The best thing to do is use the USB modem on the laptop, connect up your desktop by ethernet cable and share the Dial-up connection in order to download any packages you may need.
gentoo-sources-2.6.28 is a good enough kernel to get things to work.
emerge usbutils ppp wvdial
sudo make menuconfig
(Refer to Gentoo handbook for full details of installing a new kernel.)
Device drivers ---> Network device support ---> <M> PPP (point-to-point protocol) support <M> PPP support for async serial ports USB support ---> <M> OHCI HCD support <M> USB Mass Storage support (provides usb-storage so it can be unloaded) <M> USB Serial Converter support (provides usbserial, very important) [*] USB Generic Serial Driver <M> USB driver for GSM and CDMA modems (provides 'option' module, v. important)
sudo make -j 3
sudo make modules_install
(Which installs the kernel modules. Restart computer.)
Bus 004 Device 006: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
(**) <- marker. Read ahead to see why this is here.
should ideally not show ‘usb-storage’
sudo rmmod usb-storage
just in case.
sudo modprobe usbserial vendor=0×12d1 product=0×1001
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
if only /dev/ttyUSB0 is shown, then unload modules ‘usbserial’ and ‘option’, unplug device and try again from the marker (**).
to get a template /etc/wvdial.conf for editing. Refer to https://help.ubuntu.com/community/DialupModemHowto/Huawei/E220/wvdial.conf and other websites to aid configuration.
APN (Access Point Name) mobile.o2.co.uk
Phone number should be *99***1# otherwise try *99#
When you have your /etc/wvdial.conf set up properly, connect with
One section I have is
[Dialer internet] Init5 = AT+CGDCONT=1,"IP","mobile.o2.co.uk" Stupid Mode = 1
Carrier Check = no
in your defaults if you get no carrier errors.